How do I do that?
Yes, I have had the same problem. I have downloaded a sheet and thought. How do I do that?
Here are instructions for the sheets I sell, some sheets have instructions on them.
I intend to add pictorial and maybe video tutorials at some point
Waterfall Sheets
Print off the sheet. Mat your toppers then…..
Lay waterfall slider piece horizontal to you and begin at the end where the end bar
is. IF there are no markings on the sheet then measure 1 ½” from the top of the bar and make a line.
Next make a line "3/4" from the last line.
Make your last line "3/4" from the last line. If there are markings then ignore previous steps
Score along the lines so that they will fold nicely. Erase pencil lines.
Flip your piece 90 degrees to the right so it is vertical to you. It will look like an upside down T and all the score marks will be at the lower part of the waterfall. Flip your 3 pictures over now and put one line of double sided tape on the top back side only of your pictures. Put the tape all the way across. Leave the backing on the tape just now. Put your pictures aside. Get your 3 matted pictures and take the tape off the first one, Tape this first picture just under the first fold line Press down firmly. Put your second picture just under the second fold line. Press down firmly. Repeat for the last picture taping it just under the third fold line and pressing it down firmly.
Fold your Slider piece in where the last fold line before the long piece starts. 8. Punch a hole in the centre bottom of the part that is sticking out past your pictures at the bottom. Attach a ribbon or a cord.
Put two brads on each side of the T near the edges or use some double sided tape.
Place your slider and pictures onto the card.
Cascade Sheets
Make a trifold card and then lay the card flat out in front of you. Cut out the cascade sheet and put the largest panel lined up in the centre of last section of the tri fold card and put the smallest panel on the first section of the tri fold. Make sure that the distance from the bottom of the tri fold is the same as the distance for the large panel. Turn the tri fold card over and put the middle sized panel onto the middle panel of the tri fold again at same distance from the bottom as the other two. Then cut the card in line with the diagonal of the panel leaving the same distance from the panel to the edge of the card as before with the bottom of the card. I will be adding pictorial demos so keep looking
Word Book
Just cut out the elements on medium weight card and layer on the elements. Then attach the pages together using either double sided tape at the spine or try punching a couple of holes and threading ribbon through. Also can be used with comb binding systems.
Teardrop
Make a trifold card and place the large rectangle panel in the centre and put the teardrops at either side and cut the card to the shape of the teardrops